AVIATION MAINTENANCE

STUDENT HAND-TOOL REQUIREMENT

F.A.R. PART 147.17 AND 147.19 COMPLIANT

The following is a list of the required hand-tools needed while attending this program. The student will be required to have these hand-tools as specified by semester or as the instructor of a class requests. The student is required to bring the tools to each laboratory period unless otherwise informed by the instructor of that particular laboratory. Students may purchase their tools from the TSTC Bookstore, Sears, Snap-On, MAC, Cornwell, S&K, and MATCO. Quality tools are recommended but not necessary. The student must have these tools in order to accomplish the assigned tasks.

1^st&2^ndSemester (General Section)

1. Basic Drafting Kit (1^stsemesteritem)(optional)

2. 2 pair of insert type foam ear plugs (1^stsemester item)

3. 1 pair OSHA approved safety glasses (1^stsemester item)

4. 6 inch steel ruler, 10ths and fractions (1^stsemester item)

5. Hacksaw Frame (1^stsemesteritem)

6. Hacksaw blades 18 teeth per in. (5)(1^stsemester item)

7. Hacksaw blades 32 teeth per in. (5)(1^stsemester item)

8. Pocket scriber (1^stsemesteritem)

9. Center punch set with at least the following sizes:(1^stsemester item)

1/8in.3/16in.

5/16in.5/32in.

1/4in.3/8in.

10. 4oz. Ball Peen Hammer (1^stsemesteritem)

11. Multi-Meter, digital or analog with 10-ampere D.C. function and 3 position ohmmeter selections. (1^stsemesteritem)

12. File handle (1^stsemesteritem)

13. File card (1^stsemesteritem)

14. 10 inch flat file, single smooth cut (1^stsemester item)

15. 10 inch ½ round file, double bastard cut(1^stsemester item)

16. 8 inch round file, single smooth cut (1^stsemester item)

17. Combination square (1^stsemesteritem)

18. Vernier dial caliper, 6 inches long, graduated in .001”(1^stsemester item)

19. Tool Box (2000cu.in. to 10,000cu.in.)(Rollaway preferred)(1^stsemester item)

20. 1/4in. drive 12 point deep and 6 point shallow socket set with at least the following sizes: (2^ndsemesteritem)

3/163/8

7/327/16

¼½

9/329/16

5/1611/32

21. Screwdriver set with at least the following sizes:(2^ndsemester item)

1 ½ in. common1 ½ in. #2 Phillips

4in. common4in.#2 Phillips

6in. common6in.#2 Phillips

8in. common8in.#2 Phillips

4in.#1 Phillips8in.#1 Phillips

22. Combination Wrench set with the following sizes:(2^ndsemester item)

¼9/16

11/325/8

3/811/16

7/16¾

½13/16

7/815/16

1

23. Pliers set with at least the following sizes:(2^ndsemester item)

6in. duckbill6in.combination

6in needle nose6in.diagonal (dikes)

6in. safety wire8in.Channel locks

3^rd&4^thSemester (Powerplant Section)

1. 3/8 in. drive 12 point deep and 6 point shallow socket set with at least the following sizes: (3^rdsemesteritem)

11/325/8

3/811/16

7/16¾

½9/16

2. ½ in. drive 12 point deep and 6 point shallow socket set with at least the following sizes: (3^rdsemesteritem)

7/16½

9/165/8

11/16¾

13/167/8

15/161

1 1/81 ¼

3. 3/8in. female to ½ male adapter (3^rdsemester item)

4. 3/8 in. drive and ½ in. break-over bar(4^thsemester item)

5. 1in. round or oval inspection mirror (4^thsemester item)

6. Magnifying glass with at least 5x power(4^thsemester item)

7. 5/16 thru ¼ in. Allen Wrench set (3^rdsemester item)

8. Pocket knife (3^rdsemesteritem)

9. Feeler gage with .0015” thickness gage(3^rdsemester item)

10. Stud Remover (Cam type)(4^thsemesteritem)

11. Tapered screw extractor set 5pc. #1 thru #5(4^thsemester item)

12. D cell flashlight with batteries (4^thsemester item)

13. 8oZ. Ball Peen hammer (3^rdsemesteritem)

14. Brass tapered punch (3^rdsemesteritem)

15. Pin punch set with at least the following sizes:(3^rdsemester item)

3/32in.1/8in.

5/32in.3/16in.

7/32in.¼in.

5/16in.3/8in.

5^th&6^thSemester (Airframe Section)

1. 10 piece flare nut wrench set (5^thsemester item)

2. Flat chisel set with at least the following sizes:(5^thsemester item)

¼3/8

½5/8

¾

3. 1 pair oxy-acetylene cutting and welding goggles with #5 lens. (5^thsemester item)

4. Friction Lighter (5^thsemesteritem)

5. 1 pair light weight welders gloves (5^thsemester item)

6. Welders cap (5^thsemesteritem)

7. 1 set long style tip cleaners (5^thsemester item)

8. Soap stone (5^thsemesteritem)

9. 3 piece aviation snip set (5^thsemesteritem)

10. 6ft. steel tape (5^thsemesteritem)